Concrete erosion control mats are an effective solution for preventing erosion on slopes, embankments, and other areas with high water flow. Needle method cement mat is a mat material made of two layers of geotextile wrapped dry concrete mixture acupuncture, which provide strength and stability to the mat.
Mass of composite cement mat: 8kg/m2, 10kg/m2, 12kg/m2, 15kg/m2, etc.
Composite cement mat should be stored in a dry and ventilated warehouse. It is strictly prohibited to open the packaging before formal construction and laying.In the process of storage and transportation, attention must be paid to moisture, waterproof and leakage powder.
Construction site:
| Density ASTM C 1185 |
1300~1600 kg/m³ |
| Felxural strength ASTM C 1185 |
>15 Mpa |
| Compressive strength ASTM C109 |
>30 Mpa |
| Durable service life |
> 30 Years |
| Material |
Concrete, PP & PE |
| Thickness |
5-15mm |
| Roll Width |
1m, 2m or customized |
| Roll Length |
5-20 m or customized |
| Weight |
8-18kg/m2 |
| Package |
Roll in bag |
| Original |
Dezhou, China |
Concrete erosion control mats features:
• Concrete erosion control mats are highly durable and can withstand extreme weather conditions, such as heavy rain, high winds, and freezing temperatures.
• They are designed to be easy to install, with interlocking sections that can be quickly assembled on-site.
• The concrete erosion mats are resistant to UV rays and do not degrade over time, ensuring long-lasting protection against erosion.
Concrete erosion control mats applications:
• Slope protection: Concrete erosion control mats can be used on steep slopes to prevent erosion caused by rain or other water flow.
• Channel lining: They are also effective for lining channels and culverts to prevent erosion and protect the surrounding soil.
• Embankment stabilization: The concrete erosion mats from EcoGeoX can be used to stabilize embankments and prevent erosion caused by heavy traffic or water flow.
• Reservoir and dam protection: Concrete erosion control blankets are widely used for protecting reservoirs and dams from erosion caused by water flow and waves.
Concrete erosion control mats are a highly durable and effective solution for preventing erosion in a wide range of applications. They are easy to install and provide long-lasting protection against the elements.
Installation Instructions
1. preparation work First, we must plan and measure to ensure a certain slope so that the water flow can flow smoothly from the upper end to the lower end. Secondly, after the construction site is cleaned and leveled, the construction line is set according to the design drawing, and the drainage slope is re-measured.
2. excavation Set the construction line according to the design requirements, the sides of the ditch need to be leveled, and the slope inside the ditch must not have any virtual soil and empty holes. It is necessary to treat the water damage parts in a tamping manner, except for debris and gravel in the slope. If necessary, use ash soil for compaction treatment, or grouting and reinforced to seal, and the treated parts are required to have good stability.
3. laying The material can be laid vertically and horizontally. Be sure to level the substrate, otherwise it will affect the appearance quality!
4. seam processing
4.1 The lateral width of the adjacent two cement blankets is 10cm wide and the depth is doubled. Place the cement blanket joint at the stack and flatten it.
4.2 Press the cement blanket above the cement blanket in the direction of the water flow, and the superimposed area shall not be less than 10cm.
4.3 Evenly apply sealant at the seam.
4.4 Fix two pieces of cement blanket with 5*38mm stainless steel screws
4.5 groove along the treatment Fix the edge of the material on the edge of the groove with rivets, and fix it with rivets, fix it and use it. The soil covers the edge.
4.6 watering solidification Before the watering, it is necessary to inspect and check the whole of the laying. After passing the water, it can be watered! It needs to be watered 9kg (thickness is calculated in 10mm) to be poured, and it must be poured less, evenly from the edge to the middle. Sprinkle water, preferably by spraying, the flow rate is 4000ml/min until the color of the cement blanket becomes darker. Do not use a water column with a high pressure! Do not step on the water after pouring water. When the temperature is ≤ 5 °C, take insulation measures. When the average temperature of day and night is higher than 30 °C, the surface should be covered with plastic film or geotextile,etc. Keep wet, watering and curing time should not be less than 3 days.
Introduction to Shandong Tianren new material Co., LTD
Shandong Tianren New Materials Co., Ltd. is a high-tech professional material production company specializing in the production and manufacturing of new composite geomaterials, integrating scientific research and development, anti-seepage design, technical consultation and construction services. Located in the Lingcheng District, Dezhou City, Shandong Province, Tengda Road in the middle of the road No. 10, is one of the largest geomaterials manufacturers in China. The geographical location is superior, the transportation is very convenient. Products are sold all over the country, widely used in water conservancy, road, railway, bridge, tunnel, environmental protection, aviation, agriculture, mining and other fields.
Our abilities:
Our company is a new composite geosynthetics production and manufacturing, research and development, anti-seepage design, technical consulting, construction services in one of the comprehensive trading company, with its own factories and cooperative factories. You'll also find that our prices are competitive.
All products are produced according to the requirements of the national quality system, and have been sampled and accepted by the national and provincial technical supervision departments, and are in line with national standards
International partnerships:
We export various geosynthetics and other products all over the world. With excellent quality and service, our products are exported to many countries in Southeast Asia, Europe and America and all over the country.
Industry certification:
Quality is at the heart of what we do. The main equipment of the company is imported from Germany, Italy and the United Kingdom, with advanced technology and excellent equipment. All products of the company are produced by national standards and international standards, with sophisticated testing instruments and complete testing means.
The company adheres to the "user-centered, quality-oriented survival", constantly improves the competitiveness of the enterprise, and strives to build the "Tianren" boutique brand, providing users with high-quality products and services, and conforming to the popular trend. If you are interested in our geosynthetics, please contact us. We welcome new partnerships with businesses around the world.
1. We regularly or according to your requirements to entrust the national testing agency quality testing
2. Monitor and manage the whole process of production, quality testing and measurement in strict accordance with ISO9001-2008 international quality system standards to ensure product quality
3. In case of construction delay or unqualified construction due to quality reasons (excluding damage or loss caused by customer responsibility or uncontrollable natural disasters), our company will provide replacement and maintenance services.
4. We will respond to customer feedback on quality issues within 24 hours.
1, Ask: What is the PAYMENT METHODS?
Re:T/T,LC, Others
2, Ask: What is the LEAD TIME?
Re: According to order quantity and stock
3, Ask: What's your MOQ? Can I order a small quantity for testing at first order?
Re:The MOQ is 100 SQM,For new clients, we accept small orders for building mutual trust and long-term business relationship
4, Ask:How do you ensure the quality
Re:We are working with three QC processes to guarantee the quality:
1.For raw materials;
2.Onsite inspection during production;
3.Final QC test for each batch of finished products
5, Ask:OEM OR ODM accepted?
Re:We can produce with our/client's brand as per customer's technical requirements
){kind=link}